If you look at the older car models, they have 3 or 4 speakers maximum. But, at present, you can find 11 speakers and 2 subwoofers for better sound production. Basically, the number of speakers depends on the car’s make and model. There must be at least four speakers, 2 placed at the front and 2 placed at the rear door. This helps to equalize the sound for both the driver and the passenger.
Some car manufacturers may also add tweeters or subwoofers to enhance the audio package. This overall sound setup improves the sound quality. For instance, in newly manufactured cars, you may also find speakers in the dashboard or seat headsets.
Basically, it is all about the placement and quantity of speakers that affect the listening experience when you are traveling in the car. Now, to improve the sound quality and audio experience, you may also install third-party speakers by replacing the original. This would definitely support you if you want to get an amplified version of the music.
In This Article:
How many watts should a car stereo have?
If you are looking for the wattage of a car stereo, then it depends on the size of the vehicle, the quality of the speaker, and the listening habit of the driver. So, while choosing a car speaker, you must check the distortion-free feature, clarity, and the maximum adjustable listening volume.
If we look at the power output of a car’s audio, then it is measured in watts per channel. This is also listed as Peak Power or RMS Power. So, you need to match the power of the car’s stereo to understand the handling capacity. For example, if the automobile audio delivers 40 watts, then the speaker has a handling capacity of 40.
You can also go for a model which has a powerful car stereo to increase the volume. Also, you can think of installing additional speakers or subwoofers. But do remember that the car’s stereo power output is affected by the interiors of the automobile, radio tuning, and speaker quality. Thus, while choosing the stereo, you must also consider the car’s electrical system. If you want to protect the electrical system, then you must install an alternator or wiring improvements to adjust with the high-power stereo.
How can you replace the car speakers?
If you want to upgrade the car’s sound system, then you have to replace the previous speaker of the car, and for that, you have to start with finding the perfect speakers that would be compatible with the car’s audio system. You need to check the size, and shape and also go through the manual before you start searching.
Next, you need to gather all the necessary tools that would be required for the replacement, such as the wire cutter, wire strippers, saw, and screwdrivers. After this, when you have found the perfect replacement speakers, you have to remove the previous speakers. Start by unplugging the negative battery terminal. Now, remove the grills or panels that are attached to the speakers, unscrew the speaker from its mounted place, and carefully remove it.
If required, you might have to cut the speaker chords and next match positive and negative terminals to fit them. Then, you have to use the mount and fit the speaker tightly in his place by screwing them. Also, check whether the wiring is stable and not interfering with any other parts.
Next, place the speaker panels or grills to adjust the speaker and fit it perfectly and tightly. Finally, establish the battery connection and start the stereo system. You can adjust the Settings and play any music to test the new speakers.
Factors to consider while buying a car speaker
While looking for a new car speakers can be overwhelming, but if you have all the factors sorted, then it would be easier to find a good quality speaker within your budget for your car. So, here are the factors that you need to consider:
Speaker size
You need to find a speaker that matches the existing speaker size. Otherwise, it won’t fit the car’s audio system. Usually, the speaker size for a car ranges from 6.5 inches, 6 X 9 inches and 5.25 inches.
Sensitivity
You need to check how the speaker can convert power into sound. If you are opting for a high-sensitivity speaker, then they would use less power to provide the same volume. So, always check the measure and determine how effective the speakers are.
Power handling capacity
Power handling accounts for the amount of power the speaker can handle. You must always opt for a high-power handling speaker if you are using an external amplifier. However, you can always go for a low-power handling speaker if you are using a factory stereo. Here based on the feature, the price range obviously differs.
Placement of the speaker
The important fact is that where you place the speaker plays a very crucial role and affects the sound quality. If you are choosing speakers without amplifiers, it won’t matter. But, if you place the speakers either to close or too far away from the listeners, then it won’t get affected. Also, if the speakers are getting obstructed by any other component, then upgrading the speaker won’t fix the issue if they are without amplifiers.
Speaker quality
You can upgrade the stereo system of the speaker by purchasing speakers without amplifiers, but if it is not done accurately, then it might be a loss for you. So, always consider the other factors along with quality, such as sensitivity, placement, and power handling
Frequency range and impedance
While you are buying a speaker, you must also be careful about the range of frequencies that the speaker can produce and always opt for a wide frequency range. If the speaker you have purchased has an amplifier or factory stereo, then make sure the impedance is compatible, and the speaker faces less resistance.
What is the cost of replacing the car’s speaker?
To replace a car’s speakers, you need to bear the quality of the speaker, the number of speakers, and the installation charges. If you are going for a high-quality speaker, then it might cost $500, and for a mid-range speaker, you might have to pay $50, and the other factors can also reflect the speaker’s cost. The features that you are looking for might vary in cost based on the ability in the market. You have to pay $ 150 or more for the installation and the labor charges. The electrical system should also be considered. If you need to repair it, then the cost can increase. Thus, it is always advised not to try any DIY methods but rather seek help from professionals to get it installed properly within budget.
What is the difference between 2 and 4 speakers in a car?
A 2 way car speaker has two high-quality drivers, and on the other hand, a 4 way car speaker might have a larger range of frequencies but cheap drivers. So, it is always advised to opt for high-quality 2 speakers rather than low-quality 4 speakers for the car.
Can 6 speakers be installed in the car?
Yes, you can install 6 speakers in your car – 2 on the rear, 2 on the side, and 2 on the dashboard. You would need one channel to connect the side speakers, one channel to connect the rear speakers, and the remaining can be connected to every single channel.
