Fix The Phone Speaker Not Working During The Call

When your phone speaker stops working during calls, it disrupts communication and causes frustration. This issue prevents you from hearing the other person, making conversations impossible. The problem often stems from software glitches, hardware malfunctions, or incorrect settings. 

This article explores the common causes of phone speaker failures during calls and provides practical solutions to fix the issue. Following these troubleshooting steps can resolve most speaker problems and restore clear audio during phone calls.

Common Causes of Phone Speaker Not Working During Call

Low Volume Settings

Phone speakers may appear non-functional during calls if the volume is set too low. Users might accidentally reduce the volume or enable silent mode, resulting in inaudible sound output. This simple oversight can lead to the misconception that the speaker is broken.

Blockage or Dirt in Speaker or Receiver

Accumulation of dust, debris, or lint in the speaker grille or receiver can muffle or block sound output. Over time, these particles build up and interfere with the speaker’s ability to produce clear audio. Regular use of phones in dusty environments or carrying them in pockets or bags increases the likelihood of such blockages.

Bluetooth Interference

Active Bluetooth connections can sometimes interfere with the phone’s speaker functionality during calls. The device might route audio to a previously connected Bluetooth headset or speaker, even when it’s not in use. This redirection of sound can make it seem like the phone speaker isn’t working.

Troubleshooting Tips for Fixing the Issue

Increase Volume

During a call, press the volume up button on your device to see how loud it is. Make sure the call volume is high enough to be heard. If you’ve already turned up the sound all the way and still can’t hear anything, try one of the other steps below.

Check for Blockages or Dirt

Examine the speaker grille and receiver for visible signs of debris or blockage. Look for dust, lint, or other particles that might obstruct sound output. If you spot any obstructions, proceed to clean the speaker carefully.

Disconnect Bluetooth

Turn off Bluetooth on your device to eliminate potential interference from wireless connections. Go to your phone’s settings, find the Bluetooth option, and toggle it off. This action ensures that audio is routed through the phone’s speaker during calls.

Clean Speaker

Use a soft-bristled brush or a clean, dry toothbrush to gently remove any visible debris from the speaker grille. For stubborn dirt, lightly dampen a cotton swab with isopropyl alcohol and carefully clean the speaker area. Avoid applying excessive pressure or allowing liquid to seep into the device.

Restart Device

Power off your phone completely, wait for a few seconds and then turn it back on. This process clears temporary software glitches that might affect speaker functionality. After restarting, test the speaker during a call to see if the issue is resolved.

Disable Silent Mode

Verify that your phone isn’t in silent or vibrate mode. Check the side switch on iPhones or the volume settings on Android devices to ensure that sound output is enabled. Some phones have a dedicated silent mode button, so make sure it’s not activated.

Check App-specific Settings

If the speaker works fine in other apps but not during calls, investigate the settings of your phone app. Look for any call-specific audio settings that might be muting or redirecting sound output. Reset these settings to their default values if necessary.

Use Safe Mode

Boot your phone into safe mode to determine if a third-party app is causing the speaker issue. In safe mode, only pre-installed apps run, helping you identify if the problem is software-related. If the speaker works in safe mode, a recently installed app might be the culprit.

Reset Factory Settings

Do a factory reset on your device as a last option. This clears out all of your info and puts your phone back to the way it was when you first got it. Back up important data before you go any further to avoid losing it. After the restart, set up your phone and make sure the speaker works.

Additional Steps to Consider

Check Audio Levels

Access your phone’s audio settings and review the various volume levels. Ensure that call volume, media volume, and notification volume are all set to appropriate levels. Some devices have separate controls for different audio types, so adjust each one accordingly.

Test Sound on Headset

Connect a wired headset or earphones to your phone and make a test call. If you can hear audio through the headset but not the speaker, the issue likely lies with the phone’s speaker hardware. This test helps isolate the problem and determine if professional repair is necessary.

Make Sure “Do Not Disturb” Mode is Not on

Check if “Do Not Disturb” mode is active on your device. This feature can silence calls and notifications, making it seem like the speaker isn’t working. Disable “Do Not Disturb” mode in your phone’s settings and test the speaker again during a call.

Seek Professional Help

If none of the above steps resolve the issue, consider seeking assistance from a professional technician or visiting an authorized service center. The problem might be due to hardware failure or more complex software issues that require expert intervention.

When troubleshooting speaker issues, start with the simplest solutions and progress to more complex ones. Begin by checking volume levels and cleaning the speaker area. These basic steps often resolve common audio problems without the need for advanced technical knowledge.

Parag Banerjee
Parag Banerjee

Parag Banerjee is an experienced Search Engine Optimizer. He has a wide knowledge of Google Updates, Analytics, and many others. He studied Computer Application from Techno India.

Articles: 283