The process of connecting an iPhone to a Bluetooth speaker is simple. Turn on Bluetooth on both devices and ensure the speaker is discoverable. Locate the speaker in the Bluetooth settings on your iPhone and tap on it to connect. You can now stream audio from your iPhone through the speaker.
It is quite obvious that you depend on Bluetooth speakers due to their convenience and high-quality audio output. If you think that your iPhone’s in-built speakers are not enough to provide you with a good listening experience, then you can connect it with a Bluetooth speaker.
The process is hassle-free and takes 2 to 3 minutes to set up a proper connection so that you can enjoy a podcast or sign in to your iTunes.
It will also be helpful if you are planning a party or just listening to some music on your own. But, do remember to keep both devices within 30 feet for a successful connection.
Let’s dive in and get to know how to connect iPhone to a Bluetooth speaker in no time. This guide will help you with all the information to get started.
In This Article:
3 Steps to Connect iPhone to Bluetooth Speaker
You can connect your iPhone or iPad with any Bluetooth speaker to stream music. Here are the steps that you need to follow in order to pair third-party Bluetooth accessories.
Step 1: Turn on Bluetooth for iPhone
- Open Settings
- Tap on Bluetooth
- Toggle the Bluetooth Switch On
Step 2: Turn on Bluetooth for the speaker
Set up the speaker and enable the Pairing mode so that it can connect with the iPhone. Look for a button that would turn on the Bluetooth feature. Different devices have different combinations of buttons to enable the Pairing mode.
It is always advised to check the speaker’s manual guide to get the steps right. If your Bluetooth speaker comes with a light indicator, then as soon as Bluetooth is enabled, it will keep flashing.
Step 3: Find The Bluetooth Speaker On iPhone
Open the Bluetooth on your iPhone and wait for a few moments so that your iPhone can search and locate the external speaker.
Now, from the list, select the device name with which you want to connect your iPhone.
Finally, you will find the name of the external device right under the paired device list. Now the Bluetooth speaker is connected to your iPhone.
How to Disconnect iPhone from External Speaker?
You can easily unpair the device by tapping on the Bluetooth option on your iPhone and toggling it off. But, if you want to completely remove the device from your iPhone, then you need to go to Settings and tap on the Bluetooth option. Select the device that you want to unpair and tap on the “Forget this device” option.
Conclusion
These steps will help you to connect Bluetooth speakers to your iPhone without any error. If you want to connect any other third-party Bluetooth accessories, such as headphones, car kit, wireless keyboard, etc., then follow the above-mentioned process. It’s time to ditch the AUX cord and enjoy cable-free music.
FAQs
Why is the iPhone not connecting to a Bluetooth speaker?
If, even after following the above-mentioned steps, your iPhone fails to connect to the speaker, then there are two possibilities: either the Bluetooth speaker has encountered a hardware problem, or both devices are too far away to set up a proper connection. So, bring both devices close to one another and try out the steps once again.
How to play music from any app through the Bluetooth speaker?
After connecting both devices, you need to go to your iPhone. Select the application through which you want to play the music and simply tap on the Play button. You can hear the audio being played through your external Bluetooth speaker.
